Bob Smith Industries - Finish-Cure 20 Minute Epoxy

Bob Smith Industries - Finish-Cure 20 Minute Epoxy

Bob Smith Industries - Finish-Cure 20 Minute Epoxy

Title
Regular price $20.99
/
  • In stock, ready to ship
  • Inventory on the way

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.

Works Best On:

  • Fiberglass
  • White Foam
  • Laminating
  • Water-Resistant


Works Good On:

  • Balsa Wood
  • Hard Wood


Please allow 2-3 days for your order to be processed and shipped. You will be notified of the shipment tracking number via the e-mail address you have provided us when the package has been sent. Currently, we will only ship to the address that matches the billing address registered to your credit card. Trying to create an order with a credit card that doesn't match your delivery can result in the cancellation of your order.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Recently viewed